Industrial Gas

Argon Gas

Spectro and 99.999% argon for TIG and MIG shielding, spectroscopy and heat treatment atmospheres.

Request a Quote Call / WhatsApp

GradesSpectro, 99.995, 99.999

HSN CodeHSN 28042100

PurityUp to 99.999%

FormCompressed gas

Cylinder SizesConfirmed per order

PressureAvailable in 150 BAR and 200 BAR

Overview

What argon gas is, and why the grade matters

Argon is completely inert. It will not react with a molten weld pool, it will not react with the sample in an instrument, and it is heavy enough to stay where you put it. That is why it became the default shielding gas for TIG and MIG welding, and why analytical laboratories build their plasma and spectroscopy work around it.

The difference between a good argon and a poor one shows up as porosity in a weld or as noise in a spectrum, and both are expensive to diagnose after the fact. Spectro grade exists precisely because instrument work cannot tolerate the trace oxygen and moisture that a general welding fill can carry.

We fill Spectro, 99.995% and 99.999% argon in Bhiwadi with analysis on request, and deliver to fabricators, laboratories and heat treatment shops across Bhiwadi, Delhi NCR, Rajasthan, Haryana and the wider industrial belt.

Applications

Where argon gas is used

TIG and MIG shieldingPrimary shielding gas for stainless, aluminium and alloy welding.

SpectroscopySpectro grade for ICP, plasma and analytical instrument supply.

Heat treatmentProtective furnace atmospheres for annealing and sintering.

Metallurgical inertingDegassing and stirring duty in steel and non ferrous processing.

Electronics and lightingFill gas and inert atmosphere in component manufacture.

Bulk shielding supplyLiquid argon in vessels for continuous, high volume welding lines.

Industries

Sectors that use it

Manufacturing Welding & Fabrication Electronics Laboratories

Handling

Handling and safety

Argon is non toxic and non flammable but heavier than air, so it collects in pits, trenches and vessel bottoms and displaces the oxygen there. Ventilate low lying work areas, gas test before entry, and keep cylinders secured upright with the correct regulator.

General guidance only. Follow the safety data sheet and your site procedures.

FAQ

Questions we are asked about argon gas

What is the difference between Spectro and 99.999% argon?Both are high purity. Spectro grade is prepared for analytical instrument duty, where trace oxygen and moisture would show up directly in the reading, so specify it when the argon feeds an instrument rather than a torch.

Do you supply argon mixtures for welding?Yes, mixtures are blended to your specification under our speciality gases line. Send us the mix and the application and we will confirm it.

Do you deliver argon across India?Yes. We fill in Bhiwadi and run scheduled deliveries into Delhi NCR, Rajasthan, Haryana and the surrounding region.

What cylinder sizes does argon come in?Argon is available in 150 BAR and 200 BAR cylinders, with the size confirmed per order. Tell us your consumption and regulator and we will quote the right pack rather than a standard one.

Industrial GasHelium GasAn inert, ultra light noble gas at up to 99.999% purity, for MRI systems, leak testing and semiconductor lines.View details Industrial GasNitrogen GasDry, inert nitrogen at up to 99.999% for blanketing, purging, food packaging and laboratory work.View details Liquefied GasLiquid ArgonBulk shielding gas in cryogenic form, for continuous welding lines and metallurgical work.View details

Need argon gas in India? Request a quote.

Tell us the grade, the volume and the delivery point. We reply with availability, cylinder options and a delivery window.